Getting Started
Getting Started
Launch ChDuino
Launch CLC
Pose Coding
Bump-Connect
Troubleshooting
Launch C-STEM Studio
Launch RoboSim
Ch Coding
Ch with Linkbot
RoboPlay Competition
SoftIntegration
Launch Ch
Launch ChIDE
Python
Intro Python
Pose Coding
Beginner Python
Coming Soon!
Algebra
+ Learning Pathways
Add Pathways
No
Yes
Getting Started
No
Yes
C-STEM Pathway
No
Yes
SoftIntegration Pathway
No
Yes
Python Pathway
No
Yes
Coming Soon Pathway
Linkbot NONE
deg/sec
deg/sec
move
joint 1 up
joint 1 stop
joint 1 down
joint 2 up
joint 2 stop
joint 2 down
up
left
down
right
zero
stop
hz
beep
x:
0
y:
0
z:
0
mag:
0
turn on accelerometer
Linkbot ID
Add
Firmware Update Needed
Arduino Update Needed
Linkbot Labs
Linkbot Labs
Learning Math and CS with Robotics
Help
FAQ
Help / Forums
Bug Report
Start Linkbot Firmware Updater
Start Arduino Firmware Updater
Error Log
×
Linkbot Hub Manager
Find
Linkbot Firmware Updater
Firmware Version 5.0.0
Steps to Update a Linkbot:
Plug in a Linkbot to the computer with the micro USB cable (Make sure no other Linkbot or Dongle is connected)
Turn off the Linkbot if it is on.
Then turn on the Linkbot. The update will begin automatically.
When the progress bar reaches 100%, the update is complete and the Linkbot can be used.
Steps to Update a Dongle:
Unplug all Linkbots and Dongles connected to the computer.
Plug the Dongle to the computer with the micro USB cable.
The update will begin automatically.
When the progress bar reaches 100%, the update is complete and the Dongle can be used.
Progress: 0%
Error
Linkbot Arduino Updater
Firmware Version 1.0.2
Instructions for Updating Linkbot Arduino:
Plug an Arduino board to your computer.
Click "Start" button. Then wait the firmware is updated with 100% on the progress bar. To flash another Arduino, return to step 1.
Progress: 0%
Start